We have created this Thermacoil Installation Case Study page to enable you to see before and after images of a typical installation. Roberts House, Harrow, HA1 2FJ, PulsaCoil 3 Replacement Case Study features a residential development made up of 352 high quality apartments. Mr L is just one of the many customers that have used our services in this area.
Roberts House, Harrow, HA1 2FJ, PulsaCoil 3 Replacement Case Study
Mr L contacted The Plumbing Group Ltd when he began having trouble with his PulsaCoil 3. It was no longer heating up as it should be. An engineer headed out to the property to take a look at the boiler. Upon arrival, the engineer carried out a range of tests on the boiler and found that the cylinder was split and leaking. When this is the case, the unit is deemed beyond economical repair and therefore has to be replaced. Because of the condition of the boiler, they were able to do a temporary fix. This meant that the customer had some hot water until his new boiler could be installed.
Mr L decided to go for a Fabdec ThermaCoil as his replacement boiler as opposed to the PulsaCoil PCS. This is because the Thermacoil is a far less complicated system. The PulsaCoil has many different components to it. For example this includes; a Printed Circuit Board, Pump, Sensors and Relays. This differs from the ThermaCoil which runs off of a a single mechanical blending valve. For the user of the system it is no different but for long term maintenance it is much simpler.
The engineer was able to remove and dispose of the old unit and install the new one in under four hours. A new time-clock was also installed at the request of the customer, to help to reduce the running costs. Mr L was then shown how to maintain and operate his new boiler for future reference.
The new ThermaCoil comes with a 10 Year Manufacturers cylinder warranty, for further details visit www.thermacoil.co.uk
To contact The Plumbing Group to discuss your PulsaCoil 3 problem please either call us on 0800 02 365 92, or visit our contact us page and fill out our contact us form.