Union Place, Birmingham, B29 7NF, PulsaCoil 3 Repair Case Study

We have created this PulsaCoil 3 repair case study page to enable you to see before and after images of a typical repair. Mr S is one of many people we have carried out a repair for in Union Place, Birmingham, B29 7NF.

Mr S contacted the Plumbing Group as his PulsaCoil 3 wasn’t working, he opted for a fixed rate repair. On arrival our Engineer carried out a full diagnosis and found that the pump and the domestic hot water sensor had failed.

Our directly employed engineers carry all spares in stock on our vehicles, our engineer drained the PulsaCoil 3, replaced the pump and the domestic hot water sensor and refilled the system. The repair was carried out on the same visit in under three hours. Mr S was then able to use the on peak boost to get hot water two hours later.

Our engineer found this job a bit of a challange as the pump was located at the back of the cupboard and was hard to access, he still managed to repair the unit and Mr S was extremely happy as he expected that he would have to replace the boiler.

PulsaCoil 3 Repair Case Study Union Place, Birmingham, B29 7NF












Share This: